TR10105 SERIES HINGE
SPECIFICATIONS
- Years produced: 1996
- Tire size: 11 x 24.5, 11 X 22.5
- Uses a 1/2” bolt inside bushing
- Flat-Bar Hinge dimensions: 1 3/4″x 6″ x 1/2″
| Part Kit | Description | QTY/Tire |
| TR10105 | TR Hinge Replacement Kit (includes all hinge parts for one complete TRAC) | 1 |
| TR1000 | Replacement bushing kit – 1/2” (Includes: Bushing, 1/2”x 2”; carriage bolt, nut and thick washer) | 12 |
| TR10065 | TR Hinge – 1/2’’ x 1 3/4’’ x 6’’ – Uses 1/2’’ Bolt – (Hinge Only) 1998-2000 | 12 |
| TR1009 | TR Bolt assembly, to mount hinge to TRAC section (includes one of each: 1/2”x 1 1/2” bolt, nut and washer) | 12 |
TR 1010 SERIES HINGE
SPECIFICATIONS
- Years produced: 1997-2000
- Tire size: 11 x 24.5, 11 X 22.5
- Uses a 1/2” bolt inside bushing
- Flat-Bar Hinge dimensions: 2″ x 6 3/4″ x 1/2″
12 of the above assembly = TR1010
| Part Kit | Description | QTY/Tire |
| TR1010 | TR Hinge Replacement Kit (includes all hinge parts for one complete TRAC) | 1 |
| TR1000 | Replacement bushing kit – 1/2” (Includes: Bushing, 1/2”x 2” carriage bolt, nut and thick washer) | 12 |
| TR1006 | TR Hinge – 1/2’’ x 2’’ x 6 3/4’’ – Uses 1/2’’ Bolt – (Hinge Only) 1998-2000 | 12 |
| TR1009 | TR Bolt assembly, to mount hinge to TRAC section (includes one of each: 1/2”x 1 1/2” bolt, nut and washer) | 12 |
AT 1010 SERIES HINGE
SPECIFICATIONS
- Years produced: 2000-2004
- Tire size: 11 x 24.5, 11 X 22.5
- Uses a 5/8” bolt inside bushing
- Flat-Bar Hinge: 2’’ x 6 3/4’’ x 1/2’’
| Part Kit | Description | QTY/Tire |
| AT1010 | AT Hinge Replacement Kit (includes all hinges and hardware for one complete tire/TRAC) | 1 |
| AT1000 | Replacement bushing kit – 5/8” (Includes: Bushing, 5/8″x 2″ carriage bolt, nut and thick washer) | 12 |
| AT1006 | AT Hinge – 1/2″ x 2″ x 6 3/4″- Uses 5/8″ bolt – (Hinge Only) 2001-2004 | 12 |
| TR1009 | TR Bolt assembly – to mount hinge to TRAC section (includes one of each: 1/2” bolt, nut and washer) | 12 |
BH 1010 SERIES HINGE
SPECIFICATIONS
- Years produced: 2005
- Tire size: 11 x 24.5, 11 X 22.5
- Uses a 5/8” bolt inside bushing
- There are four 3/8″ formed hinges per TRAC section. This kit replaces the oval hole hinges only.
| Part Kit | Description | QTY/Tire |
| BH1010 | BH Hinge Replacement Kit (includes all hinges and hardware for one complete tire/TRAC) | 1 |
| BH1000 | Replacement bushing kit – 5/8” (Includes: Bushing, 5/8″x 2″ carriage bolt, nut and standard washer) | 12 |
| BH1006 | BH Hinge – Formed Hinge – Uses 5/8″ bolt – (Hinge Only) 2005 | 12 |
| BH1009 | BH Bolt assembly – to mount hinge to TRAC section (includes one of each: 1/2” x 1 1/4″ bolt and nut) | 12 |
FH 1010 SERIES HINGE
TRAC Produced in 2006
To order this hinge kit you must send us a set (a left and right round hole hinge) so we can get the correct parts to you. Hinges in the FH series have all of the following characteristics:
- Four (4) 3/8″ thick formed hinges attach to each TRAC section.
- Two of them have round holes and two have square holes.
- They are shaped like the pictures below.
NOTE: The hinges in the BH1010 Series also have four (4) 3/8″ formed hinges. However, They are not shaped as those below.
| Part Kit | Description | QTY/Tire |
| FH1010 | FH Hinge Replacement Kit (includes all hinges and hardware for one complete tire/TRAC) | 1 |
| FH1000 | FH Replacement bushing kit – 5/8” (Includes: Bushing, 5/8″x 2″ carriage bolt, nut and standard washer) | 12 |
| FH1006 | FH Hinge – Formed Hinge- Uses 5/8″ bolt – (Hinge Only) 2006-2007 | 12 |
| BH1009 | BH Bolt assembly – to mount hinge to TRAC section (includes one of each: 1/2” x 1 1/4″ bolt and nut) | 12 |
AG 1010 SERIES HINGE
SPECIFICATIONS
- Years produced: 2007-2019
- Tire size: 11 x 24.5 until 2012, 11 X 22.5
- Uses a 5/8” bolt inside bushing
- There are only two (2) 3/8″ formed hinges per TRAC section. The square hole hinge is built into the TRAC section itself.
| Part Kit | Description | QTY/Tire |
| AG1010 | AG Hinge Replacement Kit (includes all hinges and hardware for one complete tire/TRAC) | 1 |
| AG1000 | Replacement bushing kit – 5/8” (Includes: Flange Bushing, 5/8″x 2″ bolt, nut & standard washer) | 12 |
| AG1006 | AG Hinge – Formed Hinge – (Hinge Only) – 2008-Present | 12 |
| BH1009 | BH Bolt assembly – to mount hinge to TRAC section (includes one of each: 1/2” x 1 1/4″ bolt and nut)) | 12 |
AH 1010 SERIES HINGE
SPECIFICATIONS
- Years produced: 2012 to 2019
- Agri-TRAC Tire size: 11 x 24.5
- Uses a 5/8” bolt inside bushing
- There are two (2) 3/8″ formed hinges per TRAC section. The square hole hinge is built into the TRAC section itself.
| Part Kit | Description | QTY/Tire |
| AH1010 | AH Hinge Replacement Kit (includes all hinges and hardware for one complete tire/TRAC) | 1 |
| AG1000 | Replacement bushing kit – 5/8” (Includes: Flange Bushing, 5/8″x 2″ bolt, nut and standard washer) | 12 |
| AH1006 | AG Hinge – Formed Hinge – 11 x 24.5 ONLY (Hinge Only) – 2012-Present | 12 |
| BH1009 | BH Bolt assembly – to mount hinge to TRAC section (includes one of each: 1/2” x 1 1/4″ bolt and nut)) | 12 |